Fuel Cell Testing Products and Services

BekkTech Testing Systems

• BT-511 Membrane Conductivity Test System (Partial)
• BT-512 Membrane Conductivity Test System (Complete)
• BT-550 Membrane & Single Cell Test System (Partial)
• BT-552 Membrane & Single Cell Test System (Complete)

Features of all BekkTech Test Systems

Systems are designed for Membrane Testing and for Single-Cell Fuel Cell Testing. Each BekkTech System includes the following features:

Gas delivery components are assembled on a panel which facilitates the following:

• Clear demonstration of the processes occuring
• Ease of repair, maintenance, or expansion
• Ability to mount in your exhaust hood

The Temperature Control System separates electronic components from gas components for safety

The Alarm Cable allows you to interlock to an external safety device (such as a hydrogen detector) for emergency shut-down in alarm conditions

BekkTech's Saturator provides accurate dew point control in various gases, at various temperature and pressures. It also provides prompt reaction to temperature changes which facilitates faster data collection.

BekkTech Test Software and Data Acquisition Software is included with the BT-512 and BT-552

BT-511 Membrane Conductivity Test System (Partial)

Designed for membrane conductivity testing. Includes gas flow and humidity control. Customer provides the computer and the Keithley 2400 Sourcemeter (or a potentiostat).

Click here for additional information on the BT-511

BT-512 Membrane Conductivity Test System (Complete)

Use this system to perform the following tests:

In-plane conductivity testing on your pure membrane sample

Contamination testing on your pure membrane sample

Through-plane conductivity testing on your membrane assembled as an MEA

Activation Energy / Transition Temperature Testing

Click here for additional information on the BT-512

BT-550 Membrane & Single-Cell Test System (Partial)

Same basic design as the BT-552. Does not include a computer, Keithley Sourcemeter, or Load Box.

Click here for additional information on the BT-550

BT-552 Membrane & Single-Cell Test System (Complete)

Use this system to perform the following tests:

• In-plane conductivity testing on your pure membrane sample
• Contamination testing on your pure membrane sample
• Through-plane conductivity testing on your membrane assembled as an MEA
• Activation Energy / Transition Temperature Testing on your pure membrane sample
• Hydrogen Crossover / Permeability Testing
• Open Circuit Testing
• Polarization Curves
• Cyclic Voltammograms (Potentiostat Required. Not Included.)

Click here for additional information on BT-552