BT-104 Saturator
The BekkTech Saturator provides accurate dew point control at varying flow rates, pressure and temperatures. Appropriate for dew points from 40C to 120C and flow rates of 100 sccm to 4000 sccm.
BT-110 Conductivity Clamp
Use the conductivity clamp to obtain ionic conductivity data on your pure membrane sample. This model is designed to be used in a beaker of liquid or in a humidity chamber. Temperatures to 150C.
BT-112 Conductivity Cell (FCT)
Use the conductivity cell to obtain ionic conductivity data on your pure membrane sample in a humidified environment. This model is designed to be used with Fuel Cell Technologies 5cm2, 10cm2, or 25cm2 Fuel Cell Test Hardware. Temperatures to 120C.
BT-115 Conductivity Cell (EC)
Use the conductivity cell to obtain ionic conductivity data on your pure membrane sample in a humidified environment. This model is designed to be used with Electrochem 5cm2 Fuel Cell Test Hardware. Temperatures to 120C.
BT-201 Temperature Control System
Provides monitoring and control for up to 5 different components. The system is designed to be wired into your external safety system (such as a hydrogen detector) for emergency shut-down upon alarm. The system also includes interlocked AC & DC power that can be used to power external devices that should shut down in alarm conditions (such as a mass flow controller or solenoid switches). LabView VIs are included for setting, monitoring, and recording temperatures.
BT-202/203 Dew Point Control Systems
This system includes the BT-201 Temperature Control System shown above. In addition, BekkTech Saturator(s) and heated gas lines are included.
BT-301/302 Pressurized DI Water Systems
Provides a source of pressurized deionized (DI) water to your test stand. Available for systems with one or two saturators.